1.1 Summary

The carrier system is produced from galvanized steel profiles and modular panel logic coordinated with the approved architectural and structural project.

2.1 Summary

Snow, wind, seismic, thermal, acoustic, and fire-related criteria are reviewed according to the project region and the selected package content.

3.1 Summary

Exterior wall assemblies are built with structural framing, exterior cladding, insulation layers, and interior lining selected according to facade and performance needs.

4.1 Summary

Interior partitions are designed to separate rooms and wet areas without compromising circulation, with board and insulation combinations chosen according to use.

5.1 Summary

Ceiling systems are coordinated with the roof package, service routing, and insulation strategy, using suitable boards for wet and dry spaces.

6.1 Summary

The roof package includes steel framing, secondary members, sheet covering, flashings, eaves, and rainwater details resolved according to project geometry.

7.1 Summary

Exterior door models are selected according to the approved package and weather exposure, together with the required hardware and locking system.

8.1 Summary

Interior door dimensions, opening directions, and finishes are resolved in line with the approved plan set and room usage.

9.1 Summary

Window systems are coordinated with facade composition, thermal targets, ventilation requirements, and opening schedules.

10.1 Summary

Surface preparation, primer compatibility, and final finish coats are selected according to the chosen board, metal, and facade materials.

11.1 Summary

Where the project includes more than one level, stair geometry, finish type, and guardrail logic are adapted to the approved architectural solution.

12.1 Summary

Intermediate floor chassis components are designed for span, stiffness, and load transfer requirements and coordinated with the floor finish package.

13.1 Summary

Switches, sockets, lighting exits, cable routes, and panel infrastructure are prepared according to the approved electrical layout.

14.1 Summary

Cold water, hot water, wastewater, and wet-area fixture points are coordinated with the selected plan and equipment package.

15.1 Summary

The site owner or main contractor is expected to complete the foundation and concrete works according to AYD Prefabrik project criteria before installation.

16.1 Summary

Transport, unloading, crane access, and site readiness checks are coordinated before dispatch to ensure controlled installation on site.

1.1 Summary

The main system is formed with cold-formed galvanized steel members and connection details engineered for the approved project and site conditions.

2.1 Summary

Project calculations review load criteria, service routing, moisture control, and the overall performance targets required by the building use.

3.1 Summary

Exterior wall assemblies include framing, sheathing, membrane layers where required, insulation, facade cladding, and interior board finishes.

4.1 Summary

Interior partitions are arranged with dry construction layers and service-friendly cavities selected according to room separation and acoustic requirements.

5.1 Summary

Ceiling build-ups are coordinated with structural framing, insulation, and service routes, with finish boards selected according to the room type.

6.1 Summary

Roof systems may include rafters or trusses, purlins, insulation, sheet covering, and flashing details coordinated with the roof geometry.

7.1 Summary

Exterior door sets are selected according to package scope, thermal expectations, and facade composition.

8.1 Summary

Interior door types, openings, and finish details are coordinated with the approved room plan and selected finish package.

9.1 Summary

Window joinery, glazing, and opening configurations are selected according to performance targets and facade rhythm.

10.1 Summary

Surface preparation and finishing coats are selected according to the chosen boards, metal components, and visible finish quality.

11.1 Summary

If the project includes multiple levels, stair dimensions, structural support, and railing logic are coordinated with the architectural layout.

12.1 Summary

Intermediate floor chassis components are arranged to support span, rigidity, and finish continuity in the upper-floor construction.

13.1 Summary

Cable routes, lighting points, switches, sockets, and related infrastructure are resolved from the coordinated electrical layout before closure.

14.1 Summary

Plumbing routes, wastewater lines, water supply points, and wet-area fixture positions are coordinated with the selected plan and wet-area package.

15.1 Summary

Foundation or slab works must be completed by the site team in line with the approved project data and anchor requirements before assembly.

16.1 Summary

Production sequence, loading plan, unloading area, and erection access are checked before mobilization to secure fast and safe installation.

1.1 Summary

AYD Prefabrik may process personal data within the scope of Law No. 6698 and the relevant secondary legislation for customer and project-related operations.

Registered contact address: Ortaköy Sanayi Sitesi, Kumru Sokak No: 23, Kat: 2, Silivri / İstanbul

2.1 Summary

The terms used in this notice should be interpreted in line with the definitions provided by the applicable personal data protection legislation.

3.1 Summary

Personal data is processed lawfully, fairly, accurately, for specific purposes, in a limited and proportionate manner, and only for the required retention period.

4.1 Summary

Data may be processed for quotation, communication, production, logistics, installation, after-sales follow-up, accounting, and legal compliance purposes.

5.1 Summary

Data may be shared to the extent necessary with suppliers, consultants, logistics partners, accountants, legal advisors, and competent public authorities.

6.1 Summary

Data may be collected through website forms, calls, e-mails, messaging channels, site visits, contracts, and project workflow records on the legal grounds permitted by law.

7.1 Summary

Data subjects may request information on processing, ask for correction, request deletion where conditions are met, and exercise the other statutory rights granted by the legislation.

Phone: +90 532 748 81 44 | E-mail: [email protected]

1.1 Summary

Cookies and similar technologies may be used on the website to support security, functionality, analytics, and communication performance.

2.1 Summary

Device identifiers, session data, and limited usage information may be processed depending on the cookie type and the legal basis applicable to that use.

3.1 Summary

Necessary, analytics, preference, and where applicable marketing-oriented cookies may be used to improve site operation and user experience. Analytics and measurement tools such as Google Analytics 4 or Google Tag are enabled only when visitor consent is provided where required.

4.1 Summary

Visitors may manage, block, or delete cookies through browser settings or consent tools, although doing so may affect some site functions. Non-essential analytics cookies can also be accepted or rejected through the on-site consent interface when available.

5.1 Summary

Cookie data may be processed by service providers and stored for periods that depend on the cookie type, browser environment, and legal requirements. Consent preference records may also be retained on server systems for audit and proof obligations.

6.1 Summary

Users may exercise their rights regarding personal data connected with cookies within the scope of the applicable personal data legislation.

7.1 Summary

This policy may be updated when legal obligations, website features, or integrated third-party services change.

1.1 Summary

Applications should be submitted through a legally valid written or approved digital method together with the information required for identity verification.

2.1 Summary

The applicant should provide full name, identification information where required, mailing address, phone number, and e-mail address for correspondence.

3.1 Summary

The applicant should explain the related customer, visitor, supplier, employee, or business relationship and identify the relevant project or process if applicable.

4.1 Summary

The application should clearly define the request, the relevant data processing activity, and any supporting information required for evaluation.

5.1 Summary

The form should include the application date, the applicant declaration, signature or equivalent verification, and any supporting attachments if necessary.

Corporate communication channel: [email protected] | Phone support: +90 532 748 81 44